| Side One |
| Band 1 |
Channel Identification: Voice on left channel, voice on right channel |
| Band 2 |
Phasing (voice alternately in phase and out of phase) |
| Band 3 |
Channel balance (-20dB pink noise L+R) |
| Band 4 |
Pink noise -20dB, L channel |
| Band 5 |
Pink noise -20dB, R channel |
| Band 6 |
Bias setting (300Hz tone L+R at +12dB) |
| Band 7 |
Bias setting (300Hz tone L+R at +14dB) |
| Band 8 |
Bias setting (300Hz tone L+R at +16dB) |
| Band 9 |
Bias setting (300Hz tone L+R at +18dB) |
| Side Two |
| Band 1 |
Tracking ability 1 (300Hz L+R at +15dB) |
| Band 2 |
Cartridge/arm lateral resonance test-sweep 25-5Hz (L+R) +1kHz pilot tone |
| Band 3 |
Cartridge/arm vertical resonance test-sweep 20Hz-6Hz |
| Band 4 |
Tracking ability 2 (300Hz L+R at +15dB) |
| Band 5 |
Cartridge alignment (azimuth) test: 300Hz vertical (L-R at 6dB: adjust for minimum mono output) |
| Band 6 |
Residual system noise (unmodulated groove) |
| Band 7 |
Full range frequency system check, 20Hz-20kHz (L+R) |
| Band 8 |
Tracking ability 3 (300Hz L+R at +15dB) |
