All items tagged with midwoofer (30)

Scan-Speak Expands Product Catalog with New Revelator Dome Tweeter and Classic Midwoofer

February 7, 2020 by audioXpress Staff

Scan-Speak Expands Product Catalog with New Revelator Dome Tweeter and Classic Midwoofer

Scan-Speak announced two new drivers, each one strategically filling a gap in one of the brand's driver families. On the higher frequency range, Scans-Speak launched the Revelator 19 mm Dome Tweeter, D2104/712000, featuring the company's patented Symmetrical Drive (SD-2) motor, with a neodymium ring magnet system with double vent and coated textile diaphragm. The other driver is a brand new 15 cm midwoofer, the 15W/8534T00, expanding the established Classic line.

Test Bench: The Wavecor WF152BD03-04 Paper Cone Midbass Woofer

November 13, 2019 by Vance Dickason

Test Bench: The Wavecor WF152BD03-04 Paper Cone Midbass Woofer

This month’s driver on Test Bench, from high-end OEM manufacturer Wavecor is the WF152BD03/04 6″ midwoofer. This is another characterization from the Voice Coil archives. This 6″ paper cone midbass woofer, like the previously reviewed Wavecor WF120, highlights Wavecor Balanced Drive system design, a proprietary distortion reducing motor technology, which results in a more symmetrical Bl curve. This article was originally published in Voice Coil, December 2010.

Test Bench: Airborne HR124B8-10L Wood Cone Midrange

November 6, 2019 by Vance Dickason

Test Bench: Airborne HR124B8-10L Wood Cone Midrange

The driver we tested is from Airborne, produced in China by long-time OEM manufacturer and high-end audio catalog retailer, Solen Electronique, Canada. The HR124B8-10L 4.5" midrange is intended for home hi-fi applications. This driver is built on a 6-spoke cast frame and the cone assembly consists of a curvilinear wood grain fiber cone and dust cap, suspended by an NBR rubber surround and a 2.75" diameter flat cloth spider. This article was originally published in Voice Coil, August 2010.

Test Bench: Faital Pro 6RS140 Midwoofer / Midrange

September 25, 2019 by Vance Dickason

Test Bench: Faital Pro 6RS140 Midwoofer / Midrange

This Test Bench examines a new pro sound woofer from Faital Pro. The Faital Pro 6” 6RS140 pro sound woofer has a power handling rating of 200 W (AES) and targets applications as a midbass or midrange in three-way stage or studio monitors, as well as midrange arrays in large PA systems. The frame is a proprietary four-spoke cast-aluminum frame, and like many small diameter drivers, it does not have a venting below the spider mounting area. Cooling for this driver is provided by a 20 mm diameter pole vent with a 22 mm flared exit. This article was originally published in Voice Coil, July 2019.

Test Bench: The New Faital Pro 6" 6PR160 Midwoofer/Midrange

August 28, 2019 by Vance Dickason

Test Bench: The New Faital Pro 6" 6PR160 Midwoofer/Midrange

This Test Bench characterizes Faital Pro’s new 6” 6PR160 pro sound midwoofer/midrange. This is a driver from the Italian pro sound OEM’s extensive line of high power handling mid-bass woofers. Applications for the 6” 6PR160 include use as midbass or midrange in three-way stage or studio monitors, as well as midrange arrays in large PA systems. This article was originally published in Voice Coil, June 2019.

Test Bench: Dayton Audio RS180P-8 7” Reference Series Midwoofer

January 30, 2019 by Vance Dickason

Test Bench: Dayton Audio RS180P-8 7” Reference Series Midwoofer

The 7” RS180P-8 Reference Series midwoofer from Dayton Audio uses a nice six-spoke cast-aluminum frame with narrow 10-mm wide spokes to minimize reflections back into the cone. The cone assembly is composed of a three-part lightweight paper cone that combines Kevlar and glass fiber with the paper slurry. Cosmetically speaking, this is very good looking driver. This article was originally published in Voice Coil, May 2014.

Test Bench: Dayton Audio Epique E160CF-8 Midbass Driver

November 28, 2018 by Vance Dickason

Test Bench: Dayton Audio Epique E160CF-8 Midbass Driver

This Test Bench characterizes the new Dayton Audio Epique E160CF-8 midbass driver, from the company’s new Epique high-end transducer line. This new 5.25” midwoofer is Dayton’s entry into the ultra-high-end driver market. Dayton built it with the intention of competing with the likes of SEAS, Scan-Speak, Eton, Accuton, and Morel. Applications for the E160CF-8 include use as a midrange in a multi-way speaker or as a woofer in a two-way speaker. This article was originally published in Voice Coil, September 2018.

Test Bench: The Alpha-5-8 5" Midbass Driver from Eminence

October 31, 2018 by Vance Dickason

Test Bench: The Alpha-5-8 5" Midbass Driver from Eminence

For this test bench article, I characterized the New Eminence Alpha-5-8 5” line array/column array midbass driver. This a new 5” midwoofer from the American Standard Series, a 24-model transducer line of epoxy-acrylic finished stamped frame woofers and midranges. Applications for the Alpha 5-8 include use as a midrange in a multi-way speaker, as multiples in a line array, or as a compact column PA speaker. This article was originally published in Voice Coil, August 2018.

PRV Audio Introduces new Mid Bass and Mid Range Drivers for 2018

August 27, 2018 by audioXpress Staff

PRV Audio Introduces new Mid Bass and Mid Range Drivers for 2018

PRV Audio announced two new mid frequency drivers optimized for very powerful pro audio applications. The 10MB800FT is a rugged 10" mid bass woofer that combines a remarkable SPL output with low distortion and extended bass response, optimized for compact enclosures and larger 2 or 3 way systems. The 8MR600X focuses on high output mid range performance, with a sensitivity of 98 dB, using a 2" voice coil to ensure high heat dissipation and the necessary motor strength to deliver high sensitivity even on high power with the minimum distortion.

Scan-Speak Introduces First Models from its New Ellipticor Driver Range

June 22, 2017 by audioXpress Staff

Scan-Speak Introduces First Models from its New Ellipticor Driver Range

Previewed at an exclusive event in Munich, in May 2017, Scan-Speak has now launched the first two drivers in its Ellipticor line, combining a series of design innovations such as elliptical voice coils, resulting in lower distortion, combined with higher SPL. The first two Ellipticor drivers released by the Danish brand include the D3404/552000 tweeter and the 18WE/4542T00, a 6.5” midwoofer.

«
1
2
3
»